Bently Nevada 9200-01-01-10-00 9200-06-01-10-00 9200-06-05-10-00 Seismoprobe Velocity Transducer
The 9200-01-01-10-00 is a loop-powered Seismoprobe velocity sensor within the 9200 series, specifically designed for industrial condition monitoring and control applications. This sensor interfaces with compatible wiring and signal conditioning equipment to output a 4-20 mA current loop signal proportional to the measured velocity, facilitating integration into control or data acquisition systems. The "01-01" range option typically corresponds to a 0-1 inch/second velocity range, while the "10-00" suffix denotes specific internal configurations or calibration variants to meet predefined performance or OEM requirements. Widely used in rotating machinery such as pumps, fans, and motors, this sensor provides precise real-time velocity measurement data to support predictive maintenance and protective logic.
The 9200-06-01-10-00 is a loop-powered Seismoprobe velocity sensor within the 9200 series, optimized for high-amplitude velocity measurement in industrial monitoring and control applications. This sensor interfaces with standard cables and signal conditioning modules, providing a 4-20 mA current loop output proportional to measured velocity for seamless integration with automation and protection systems. The "06" full-scale option typically corresponds to a 0-6 in/s velocity range, while the suffix "10-00" denotes specific internal configurations or calibration variants tailored to meet unique operational requirements or OEM specifications. Suitable for equipment such as compressors, large fans, and motors, this sensor delivers precise real-time velocity data to support predictive maintenance and equipment protection.
9200 Seismoprobe Velocity Transducers
Description
Bently Nevada™ Seismoprobe Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing housing, casing, or structural vibration. The two-wire systems consist of a transducer and appropriate cable. The Seismoprobe family of velocity transducers is a two-wire design that uses moving-coil technology. It provides a voltage output directly proportional to the transducer's vibration velocity.
Moving-coil transducers are less sensitive to impact or impulsive excitation than solid-state velocity transducers, which are inherently accelerometers with embedded
integration electronics. Moving-coil transducers are less sensitive to impact or
impulsive excitation and can represent a good choice for certain applications. Because they don't require external power, they are convenient for portable measurement
applications.
9200: The 9200 is a two-wire transducer suitable for continuous monitoring or for periodic measurements in conjunction with test or diagnostic instruments. When ordered with the integral cable option, the 9200 has excellent resistance to corrosive environments without need of additional protection.
Two-wire Transducer
9200-AA-BB-CC-DD
A: Transducer Mounting Angle/Minimum Operating Frequency Option
01 0 ±2.5, 4.5 Hz (270 cpm)
02 45 ±2.5, 4.5 Hz (270 cpm)
03 90 ±2.5, 4.5 Hz (270 cpm)
06 0 ±100, 10 Hz (600 cpm)
09 0 ±180, 15 Hz (900 cpm)
B: Connector/Cable Option
01 Top Mount (no cable)
02 Side Mount (no cable)
05 Terminal block top mount (no cable)
10 through 50
10 10 feet (3.0 meter)
15 15 feet (4.6 meter)
22 22 feet (6.7 meter)
32 32 feet (9.8 meter)
50 50 feet (15.2 meter)
C: Mounting Base Option
01 Circular; 1/4-20 UNC stud
02 Circular; 1/4-28 UNF stud
03 Rectangular flange
04 Circular; with three 8-32 threaded studs on a 44 mm (1.75 in) diameter bolt circle
05 No base; 1/2-20 UNF-3A stud
06 Isolated circular 1/4-20 UNC stud
07 Isolated circular 1/4-28 UNF stud
08 Isolated rectangular flange
09 Isolated circular 5/8-18 UNF stud
10 Circular; M10X1 stud
11 Isolated circular M10X1
12 Isolated circular 1/2-20 UNF-2A
D: Agency Approval Option
00 No Approvals
01 CSA
04 ATEX/IECEx
Description
| Parameter |
Specification |
| Sensitivity |
20 mV/mm/s (500 mV/in/s), ±5% when properly terminated and oriented at the angle of calibration |
| Calibration Load |
10 kΩ Terminal "A" to "B"; Output taken across pins "A" and "B" |
| Sensitivity Temperature Coefficient |
0.2%/°C |
| Frequency Response |
4.5 to 1000 Hz (270 to 60,000 CPM); +0, -3dB typical |
| Frequency Response |
10 to 1000 Hz (600 to 60,000 CPM); +0, -3dB typical |
| Frequency Response |
15 to 1000 Hz (900 to 60,000 CPM); +0, -3dB typical |
| Frequency Response |
From min operating frequency to 1 kHz (60,000 CPM); +0, -3dB typical. Contact Bently Nevada for detailed calibration data |
| Dynamic Operating Range |
2.54 mm (0.100 in) peak to peak maximum displacement |
| Velocity Range |
25 mm/s (1 in/s) (at +22 °C of casing vibration at 100 Hz with a 10 kΩ load) |
| Coil Resistance |
1.25 kΩ ±5% |
| Locked Coil Inductance |
125 mH, typical |
| Amplitude Linearity |
±5% from 0.01 to 5.0 in/s (0.254 to 127 mm/s) at 100 Hz (6000 CPM) |
| Shock Resistance |
Withstands 50 g peak maximum acceleration along non-sensitive axis |
| Transverse Sensitivity |
±10% maximum of the sensitive axis sensitivity at 100 Hz and 1.0 in/s (2.54 cm/s) |
| Polarity of Output Signal |
Pin A goes positive with respect to Pin B when the transducer case velocity is towards the connector |
| Lead Wire Length |
305 meters (1,000 feet) maximum between Seismoprobe Velocity Transducer and 3300 or Bently Nevada™ 3500 Monitor |
Environmental Limits
| Parameter |
Specification |
| Operating and Storage Temperature (9200) |
-29°C to +121°C (-20°F to +250°F) |
| Operating and Storage Temperature (74712) |
-29°C to +204°C (-20°F to +400°F) |
| Environment |
Dust and moisture resistant |
| Relative Humidity |
To 95%, noncondensing; 100%, non-submerged, when ordered with integral cable |
| Maximum Use Altitude |
2000 m (6,561 ft) above sea level |
Theoretical Velocity Seismoprobe Frequency Response
Our warehouse maintains a comprehensive inventory of Bently Nevada monitoring and automation components, ready to support emergency replacements and scheduled maintenance. We stock large quantities of both common and hard-to-find models, including numerous Bentley Nevada part numbers such as
9200-01-01-10-00
9200-06-01-10-00
9200-06-05-10-00
and many other Bently Nevada part numbers. Leveraging our deep inventory and streamlined fulfillment processes, we deliver rapid worldwide shipping and bulk supply capabilities to minimize downtime and ensure operational continuity for our customers.
Q: Are all Bently Nevada parts brand new?
A: Yes. All Bently Nevada products we supply are 100% genuine and unused, delivered in factory-sealed condition.
Q: How do I get an accurate quote?
A: Prices displayed on the website are for reference only. For final pricing confirmation on models such as 9200-01-01-10-00 9200-06-01-10-00 9200-06-05-10-00, please contact Lydia directly for a fast and precise quote.
Q: How long does shipping take?
A: In-stock items typically ship immediately after payment. Delivery times vary by destination; expedited shipping is available for urgent orders.
Q: Do you accept international orders?
A: Absolutely. We offer worldwide shipping and have a long history of supplying customers across multiple regions.
Moore Automation is a global supplier of industrial automation and condition monitoring spare parts, with a particular focus on Bentley Nevada solutions. We help customers maintain systems and extend equipment life by ensuring stable access to genuine parts-including widely used models like 9200-01-01-10-00 9200-06-01-10-00
9200-06-05-10-00. Leveraging our experienced team, extensive inventory, and reliable international logistics network, we serve customers in over 160 countries, delivering rapid response, stable supply, and long-term partnership value.
| Bently Nevada |
Bently Nevada |
| 330104-00-08-05-02-05 |
330180-X1-CN MOD:143416-29 |
| 3500/92 136180-01 |
330130-040-10-CN |
| 330103-00-03-05-02-00 |
3500/32M |
| 172103-01 |
330180-X1-05 MOD:143945-05 |
| 330106-05-30-15-02-CN |
140471-01 |
| 330106-XX-XX-10-02-00 MOD:145628-01 |
3500/42E |
| 3500/05-01-02-00-00-00 |
330171-00-08-10-02-00 |
| 330103-00-12-10-02-CN |
330103-06-13-05-02-CN |
| 3500/93 135785-02 |
84145-01 |
| 330103-12-25-10-01-00 |
330104-00-07-50-02-00 |
| 30190-035-00-00 |
190501-04-00-00 |
| 330153-01 |
330103-00-11-10-02-00 |
| 3500/45 176449-04 |
128275-01E |
| 88286-01J |
133434-01 |
| 990-04-50-02-00 |
9200-03-05-10-00 |
| 330103-00-10-10-02-00 |
330103-07-12-10-02-00 |
| 330101-00-24-10-02-05 |
PX49950232 00270143 |
| 330500-02-CN |
330130-045-02-00 |
| 330180-X0-05 |
330104-00-10-05-01-05 |
Audited Supplier 
){kind=link}